GAO嵌入式公司

We are GAO Embedded Inc. based in Toronto, Canada. We are member of Tradekey.com since July, 2008. Our business is related to Electrical & Electronics Supplies industry and we specifically deal in TI DSP Emulator & Debugger. Please find our product details below:Emulator & Debugger : GAO TDS560 (Backward Compatible with XDS510)USBGAO TDS560 USB TI DSP Emulator - Short Description:GAO TDS560 USB TI DSP Emulator is based on TI XDS560 technology and designed to be used with digital signal processors (DSP) operating at 1.0-5.0 volts. The emulator itself is a USB device. It is fully plug and play compatible. GAO TDS560 USB TI DSP Emulator is designed to operate with TI Code Composer Studio IDE debug tool and is compatible with Windows 98SE /2000/XP/2003 Server. GAO TDS560 USB TI DSP Emulator - Emulator Features:USB compatible. Simple Connection, fully Plug-and-Play compatible-no jumpers, no switch settings Based on TI XDS560 technology Supports TI DSP with a JTAG (IEEE 1149.1) interface: C2000, F2400, C27X, F28X, C54X, C55X, C6000, C64X, TMS470 (ARM) and OMAP platforms Supports TI Code Composer Studio Compatible with XDS510 Real-Time data exchange (RTDX) bandwidth over 2 Mb/s Real-time event sequence server without stopping the application Supports multiprocessor debugging of same or different type Wide dynamic operating voltage: 1.0 to 5.0 volts Programmable TCK: 500KHz to 35MHz Increasing code download speed up to 8x faster than XDS510 Overall cable/pod length of 6ft (1.5m) Hardware detection of power losses and cable disconnects All pod signals are ESD protectedGAO XDS510 USB 2.0GAO XDS510 USB 2.0 Enhanced TI DSP Emulator (with latest driver for both CCS3.3 and CCS2.x) is a standard high-speed USB2.0 interface, with up to 480MB/s data transfer rate, plug-and-play, compatible with USB1.1 host. Standardized JTAG emulation interface, saves users computer resources; interface protection design to fully support hot-plug at JTAG interface. For Windows98/NT/2000/XP. Latest driver for CCS2.x, CCS3.1 and CCS3.3, to support C and Assembler. Realizes Flash program for F28x/F240x/F24x/F20x. High emulating speed, support RTDX. Does not use the system resources. Self-regulate to DSP voltage of the object board. Prevent system from crashing and becoming non-rebootable when the power of target board goes off. Able to emulate TIs TMS320C2000/3000/5000/6000, C3X/4X/5X/8X, OMAP families. Support multi-DSP emulation. Easy to install, run stable at high speed, lower price. GAO Tek Inc. is an international leading provider of engineering development tools, RFID hardware, security products, test and measurement instruments, and electronic components.GAO XDS510 USB 2.0 Enhanced TI DSP Emulator - Features: Standard high-speed USB2.0 interface, up to 480MB/s data transfer rate, plug-and-play, compatible with USB1.1 host Standardized JTAG emulation interface, saves users computer resources; interface protection design to fully support hot-plug at JTAG interface For Windows98/NT/2000/XP Latest driver for both CCS3.3 and CCS2.x, to support C and Assembler Realizes Flash program for F28x/F240x/F24x/F20x High emulating speed, supports RTDX Does not use the system resources Self-regulated to DSP voltage of the target board Prevent system from crashing and becoming non-rebootable when the power of target board goes off Able to emulate TIs TMS320C2000/3000/5000/6000, C3X/4X/5X/8X, OMAP1510/1610/1710/2420/310/5910 Support multi-DSP emulation Easy to install, run stable at high speed, lower priceThank you for taking the time to go through our business profile. If there are any question, inquiry or comments, please feel free to contact us.